Dr. Karl E. Peace, a biostatistician, author, and philanthropist who has worked in public health for decades, has donated his 32-car collection to benefit Georgia Southern University. One of Dr. Peace’s previous contributions, an endowment in honor of his late wife, Dr. Jiann-Ping Hsu, allowed the university to establish a college of public health in her name.

Hagerty Marketplace is hosting the auction of The Dr. Karl Peace & Georgia Southern University Collection, the majority of which are Studebakers.

We can’t remember the last time we saw so many of South Bend’s finest under one roof. While there are a couple of post-Studebaker Avantis, a Chevy, a Buick, a Mercury, and a couple of Fords among the collection up for sale, let’s take a look at some of our favorite Studebakers that we’ll be paying particularly close attention to as the auctions come to a close starting on June 11.

1953 Studebaker Champion Regal Starliner

The 1953 model year marked the first year of the low, sleek Starliner coupes, penned by Robert Bourke at Studebaker’s design studio, which was headed by the legendary Raymond Loewy. Studebaker coupes of this era are a favorite among land speed racers because they perform much better than their peers, and it’s easy to see why: Their streamlined shapes were unlike anything else on the road. Later Studebaker Hawk variations expanded on the theme with fins and extra trim—we’ll be highlighting some of those as well—but the original Starliner is one of the best iterations and proves that sometimes less is more.

1957 Studebaker Golden Hawk

Studebaker’s most powerful and prestigious model at the time, the Golden Hawk debuted in 1956 with 352 cubic inches of Packard V-8 power, showing the fruits of the brand’s merger with Packard two years prior. For 1957, a Studebaker 289 replaced the larger Packard mill, but the output was the same 275 horsepower as before thanks to a centrifugal supercharger. These luxurious winged coupes are a rare treat, and because a 1956 model participated in the famed Mille Miglia, this one in particular could also be eligible for entry, adding another reason why a collector might see this Golden Hawk as the prize of Dr. Peace’s collection.

1960 Studebaker Champ Pickup

Studebaker didn’t have the deep pockets of its Big Three rivals, so it had to get creative in the late ‘50s when the brand needed to replace its aging pickup truck line that had been in service since 1949. Using the same chassis and stepside bed as its previous light-duty pickup, Studebaker cobbled a truck cab together by shortening a Lark sedan. We’ve gotta say, for something built on a shoestring budget, the styling works pretty well. 1960 marked the final year of a 170 inline-six as a flathead; it got an overhead-valve cylinder head in 1961. These pickups are a rare sight and would likely gather quite a crowd at any car show. Combine that with its fantastic gold paint and this one was an easy pick for our list.

1962 Studebaker Gran Turismo Hawk

The Gran Gurismo Hawk represented the final evolution of the sleek Starliner coupe into a more formal and stately touring car. The prominent grille might be a bit brash, but the new greenhouse gave the Gran Tursimo Hawk an all-new profile that matched its more upscale ambition. Inside, a plush interior kept up the theme. This one is powered by a 289 V-8 and a three-speed manual. Membership to the Brown Car Appreciation Society is complimentary.

1964 Studebaker Avanti

Plenty of Studebaker’s designs were vastly different from anything else on the market, yet we can’t help but think that the Avanti was perhaps the most ambitious effort the brand ever made. Its sleek fiberglass body is unmistakable. Studebaker-produced Avanti models were powered by 289-cubic-inch Studebaker V-8s, some with optional Paxton superchargers like the Golden Hawk. This one is naturally aspirated and backed by a four-speed manual transmission. Finished in blue over a blue and white interior, this example looks fantastic in photos, although a few mechanical and cosmetic issues need sorting out. It’s still a well-preserved example of a sporty personal luxury car bursting with style.

1964 Studebaker Daytona Convertible

Like the Champ pickup we mentioned previously, the Daytona used a lot of the mechanical underpinnings of its predecessor. In this case, that was the compact Lark, the same car that served as the basis of the Champ. Renowned designer Brooks Stevens was responsible for completely redesigning the Daytona to compete with rivals like the Dodge Dart, Chevy Nova, and Ford Falcon. We’d say he succeeded, as the lines look clean and sharp, even today. Just 416 Daytona convertibles were built in South Bend before production moved to Ontario, so this represents one of the last U.S.-built Studebakers in the company’s history.

There are plenty of other Studebakers in the Dr. Karl Peace & Georgia Southern University collection—plus the odd Chevy, Ford, and Buick. If you’ve got room in your collection for a bit of American car history outside of the Big Three, then you might consider one of South Bend’s stylish alternatives and help Georgia Southern University in the process.

***

Check out the Hagerty Media homepage so you don’t miss a single story, or better yet, bookmark it. To get our best stories delivered right to your inbox, subscribe to our newsletters.

The post 6 Stylish Studebakers up for Grabs appeared first on Hagerty Media.

Let’s be clear, some cars have a face for the big screen (just about any Aston Martin, for example). Others have a mug for radio (Fiat Multipla, anyone?). Somewhere in between are the cars that best lend their front ends to . . . pumpkins.

Because it is decorative gourd season, folks, we figured it was time to come up with the nowhere-near definitive list of automotive jack-o-lanterns. There’s a delicate balance, of course, between what’s easy to sketch on paper and what translates well to the side of a giant orange fruit, but who are we to determine what is and isn’t possible when you put carving tools in the hands of a master, uh, squashwright? (We’re in it solely for the seeds, anyway—salted. None of this butter and cinnamon-sugar business, thanks).

So, without further ado, your 2023 list of the auto faces best translated into jack-o-lanternmobiles.

Austin-Healey Bugeye Sprite

Not all Halloween décor needs to be spooky. And whatever the opposite of spooky is, the Sprite is it. With a big goofy smile and big goofy eyes, this Brit is the ideal kid-greeter for your front stoop. Be careful, though, one wrong slice and you might turn this happy little Jekyll into its more sinister Hyde—the Daimler SP250.

Rolls-Royce Phantom II

Beyond its ghostly name, the ginormous Rolls presents a face only its cyborg mother could love—and people with half a million bucks to drop on a luxo-commuter. Keep in mind the front end of this thing is as big and as upright as the face of an HD Silverado, so you’ll want a fat, slab-sided pumpkin to accommodate that maw and the squinty, menacing eyes.

BMW i4

BMW’s trademark kidney-bean front end easily translates to fleshy sculpture, and the marque’s history offers up a broad range of simple, elegant faces to choose from. The 2002? Adorable! For this exercise, however, we’re looking squarely at the visage applied to the German carmaker’s all-electric sedan. To go from the understated elegance of the E21 (1975–83) 3 Series to the bucktoothed grin of today’s battery-powered i4 is a curious evolution indeed. This car doesn’t even need a grille; why BMW gave it the largest one ever devised is a mystery for our time.

Isuzu VehiCROSS

If goofy cartoon vampires are your thing, then the weirdly adorable VehiCROSS is the perfect template for your masterpiece. The tiny sharp teeth poking out from the grille are juuuust threatening enough to say “I bite” while the rest of the thing screams “BUT IT TICKLES!” Wrapping the lower half of the pumpkin in black plastic is optional but, for the sake of authenticity, mandatory.

Studebaker Avanti

If you’re pressed for time, or you simply don’t know how to do noses, skip that feature entirely by carving an Avanti face. Make it easy on yourself by going the 1963–’64 route: You really just need a couple of circles spaced an uncomfortably long distance apart, with a long, thin, completely flat line beneath them. Boom, done. And no one will mistake it for anything else.

What are you carving up this Halloween? Share your car-themed jack-o-lanterns with us on Facebook by clicking this link.

***

Check out the Hagerty Media homepage so you don’t miss a single story, or better yet, bookmark it. To get our best stories delivered right to your inbox, subscribe to our newsletters.

The post 5 cars with faces made for pumpkin-carving appeared first on Hagerty Media.

Some time in March 1963, my parents rented a spring break “vacation apartment” in Fort Lauderdale, Florida. I was 9 years old, and my hobby was building car models—AMT models, specifically. Despite my enthusiasm for the endeavor, I wasn’t very talented in the execution. Actually, I was terrible, and if half a tube of glue was called for, you could expect me to use at least two tubes.

We got to Fort Lauderdale for a beach vacation, and it rained. And rained. And rained, which left us close to nothing to do. In those pre-Yelp, pre-Airbnb days, Dad had simply asked the rental agent how close the place was to the water, to which the agent replied, “Just two blocks!” Of course, Dad meant the ocean, not the drainage canal nearby.

With little to do, it was quickly turning into a cheerless vacation. Then my dad rescued it by taking me to a hobby shop. It was there I found the model that would change my life and set me on a path toward enlightenment and endless pride. I really do mean that, but said path was not without some head-scratching, some embarrassment, and a lifetime of explanations.

I bought AMT’s 1:25-scale plastic Studebaker Avanti. More of a spaceship than a car to this 9-year-old, the real Avanti had a futuristic design with an (almost) grille-less front end, snappy 2+2 seating, and a large greenhouse with a back window easily the size of a Triumph TR2. It was made of exotic fiberglass, and it was very fast. The model was the full manifestation of a car from the future, delivered into my hands that day. Within hours, the Avanti and I had a full working relationship, boy and inanimate object, a car that looked to me like a magic portal to the future. My future. And now, almost 60 years on, it truly was that portal.

The 9-year-old me struggled in school, and friends were tough to come by, but I quickly learned that I could take my love of cars everywhere. I could read about them, I could occasionally ride in them, I could endlessly dream about them, and, if I could live through those seemingly 100 years between ages 9 and 16, I might actually be able to drive them. Cars didn’t judge, cars didn’t criticize, cars didn’t tell me what was wrong with me.

The Avanti and I, we bonded. Not just because it, like me, was a bit of an oddball, but because it is so misunderstood. I get that some people think it’s ugly. I understand when people say it was a failure because it didn’t save a 100-year-old company that had been on its death bed even before an ill-advised 1954 merger with Packard. That stuff didn’t matter to me back then, and it matters even less today.

Right around the same time I got my driver’s license, I managed to get my very own Avanti. It was sitting at Sun Motors on Fairfax Drive in Arlington, Virginia. Avanti Gold, a supercharged 1963 four-speed R-2 model with a fawn and elk interior. My boss, a hardened old soul five years my senior, did the negotiations for me, all of which involved enough convoluted horse trading worthy of a Silk Road merchant four centuries prior.

I have since owned well over 100 of them, which makes me just expert enough to run you through the car’s first four generations.

The Studebaker Years, 1963–64

The 1963 Avanti had a 289-cubic-inch Studebaker V-8 as standard and was available in non-supercharged (R-1) and Supercharged models (R-2). The base, and rarely seen, transmission was a three-speed manual; a four-speed manual and a BorgWarner automatic were options. Air conditioning was not available on R-2s, as the Paxton supercharger left no room underhood for an A/C compressor.

All Studebaker Avantis were equipped with Dunlop disc brakes up front and conventional drum brakes in the rear. Options included power steering, power windows, an AM or AM/FM radio (both were rebranded Delco units), tinted glass, left and/or right “Stratovue” exterior mirrors, and a host of other convenience items. All 1963 interiors were two-tone vinyl, with fawn (a light tan) on top and colors such black, turquoise, orange, elk (darker brown), or red below. The carpets were tuxedo “salt and pepper” style (not GM sourced, but similar to those in the C1 Corvette).

In 1964, a few features were added. The front end received square headlight glass lenses, replacing the previous round lenses. Inside, a tilt steering wheel became an option. The two-tone vinyl interior was changed out for a single color, and the tan painted dashboard and console pieces were replaced with woodgrain vinyl applique. The tan steering wheel also became a brown woodgrain. The bucket seats, lightly disguised copies of Alfa Romeo buckets, got thicker seat backs in last few hundred cars.

An R-3 engine was also added, but only for the last nine cars off the assembly line, in December 1963. The R-3 was bored out slightly, and the Carter AFB carburetor was enclosed in an airbox for better performance. A rumored twin-carbureted R-4 never made it to production.

Getting further into the weeds, running changes on the production line actually gave us some “1963½” models, which featured a 1964-style interior with 1963-style round headlights. Perhaps even more obscure are the cars that were sent to Nevada for something called the “Las Vegas Driveaway.” Those cars, slated to have vinyl applique on the dash and console, instead featured black paint. The rumor is that heat + early vinyl = excessive peeling, so the move was made to avoid angry customers.

Such is the nature of small-volume production, few Avantis from this era are exact duplicates. With six exterior colors offered (including different formulas for red between 1963 and ’64), and nearly endless option combinations, the cars were all semi-personalized. The total number of Studebaker Avanti cars built is generally agreed to be 4643. How many remain is unclear, but my best guess is “somewhat fewer than 3000—perhaps 2600?” Though they are not completely immune to rust, the fiberglass bodies have helped with attrition rates, and the Avanti was always regarded as a “special” car, even when new.

The RQA Avanti II Years, 1965–69

When Studebaker closed its factory in South Bend, Indiana, in December 1963, the Avanti was one of the casualties. Enter two South Bend car dealers, Leo Newman and Nate Altman. The duo bought production rights and much of the parts supply for the Avanti and moved manufacturing to one of the former Studebaker South Bend interior finish buildings. A matter of months later, the Avanti II emerged.

Gone was the distinctive rake to the front end, thanks to a slightly taller new General Motors powerplant. These are known as the RQA cars because of the prefix to their serial numbers, as in RQA-0XX. They were essentially 1964 Avantis, now totally handbuilt, with a Chevrolet 327 V-8 for power. I’m a big fan of the earliest Avanti IIs. Make mine an air-conditioned four-speed with the available 350 horses, please.

The Avanti II quickly became a highly personalized car, as you could order an unlimited combination of paint colors and interior fabric choices. A Grecian Bronze exterior with a marbled blue vinyl interior? Not a problem. Would you like red carpets with that? Despite some outliers, most Avanti IIs were tastefully done, and those that survive tend to be bargains. It really is a lot of car for the money.

The RQB Avanti II Years, 1970–82

The later RQB cars (again, because of their s/n prefix) are easy to spot thanks to their high-back bucket seats with built-in headrests. As time went by, not surprisingly, the Avanti became more luxurious and lost some of its performance edge. The 327 V-8 was replaced by a 350-cubic-inch GM unit, with a 400 also available in some years.

Increasingly, leather replaced vinyl in the seats, door panels, and trim. The AM/FM radio sprouted a cassette deck or 8-track player. Sunroofs became the norm. The carpeting, once like every other 1960s car, grew a deeper pile, and in some cases, turned shag. After Nate Altman’s death, his brother Arnold took on much of the day-to-day activity of running a small automobile company in the 1970s. The challenges of being America’s fifth or sixth largest (remember Checker and Excalibur?) automobile company were close to legendary. Payroll had to be made, government regulations had to be addressed, and a once-seemingly endless but now dwindling supply of parts had to be procured—at ever increasingly expensive costs. Avanti needed its next savior.

The Steve Blake Years, 1983–85

Washington D.C. real estate developer Steve Blake had been in purchase talks with Leo Newman and Arnold Altman for some time. On October 1, 1982, the transfer of ownership became final.

The first “Blake Avantis” were 1983 models. Steve was a personal friend, and his outgoing nature and vociferous personality made him a true one-of-a-kind. His Avanti vision, never fully executed, was to make an American version of the Porsche 911—an ever-evolving, ever-improving performance and luxury brand.

The costly blade-style chrome bumpers were replaced for 1984 with Kevlar-reinforced fiberglass units, and the change was dramatic. Blake hired chassis engineers, started a racing program, fitted the cars with 305-cubic-inch L69 Camaro V-8s, and used public relations and a touch of advertising in an effort to make the Avanti look and drive fresh in the 1980s. A convertible version was launched for model year 1985, and three production cars were actually built. Despite increasing sales, and plagued by paint problems, Avanti closed its doors for the first, but not the last, time in early 1986.

Although the original Avanti lived on in many forms and with an increasingly interesting list of owners, the original chassis—a Studebaker unit that traced its roots to the 1950s—was in production from 1963 to 1985. Love it or hate it, the Avanti was an American icon of the late mid-century.

What they’re worth now

Early Avantis, particularly the ultra-rare ’64 R-3, remain the most coveted of the marque. The Studebaker R-1 and R-2 are both worth more than double the Avanti II models, which represent excellent entry points into the Avanti world. That said, we are seeing renewed interest in early Avanti II cars, as well as Blake 1983–85 cars. Interest in all Avanti generations skews heavily toward baby boomers, though our quote data shows Gen X drawn to the early cars, while later cars have garnered a significant amount of attention with Gen Z.

The Avanti’s trajectory is strikingly similar to that of the Cord 810/812: the last dying effort of a dying Indiana car manufacturer, available in naturally aspirated or supercharged form, sporty and fast, with styling that was initially polarizing but no longer looks out of place.

I still have fond memories of that rainy Fort Lauderdale vacation half a century ago, and I’ve never spent too much time wondering how my life would be different if I had picked up a Mercedes 300SL roadster model instead of the Avanti. We were pals, the Avanti and me, and we still are.

***

Check out the Hagerty Media homepage so you don’t miss a single story, or better yet, bookmark it. To get our best stories delivered right to your inbox, subscribe to our newsletters. 

Via Insider

The post The long, remarkable life of the Studebaker Avanti appeared first on Hagerty Media.